BESCOMT

Fin press production line

1. Bestel fin stamping production line includes uncoiler, oil tank, punch, die and aggregate.

2. The fin punching speed is divided into 200 levels and 250 levels.

3. 24 rows of punching tablets, other sizes can be customized.

4. Equipment automatic lubrication, automatic counting, single and double jump (customized)

5. The production line can achieve 24 hours of continuous work


◆The body is welded with steel plates and has good rigidity.

◆The crankshaft is placed longitudinally, the distance of the fulcrum is short, and the curvature and rigidity are good.

◆The main shaft of the punch press is an imported alloy needle roller bearing, which is durable and sturdy, which guarantees the accuracy of the punch press operation and reduces the thermal impact of the punch press.

◆Adopt Shanghai Yuyi (Italian brand) combined dry pneumatic friction clutch, with large transmission torque, small rotational inertia, and convenient installation and maintenance.

◆The slider adopts Japan (SHOWA) or Taiwan (KINGAIR) hydraulic overload protection device to sensitively protect the body and mold.

◆The height of the slider mold is automatically adjusted, with a fine-tuned scale display, which is convenient and accurate

◆The slider adopts six-sided prestressed rolling guide rail, which has high guiding accuracy, good accuracy retention and convenient adjustment.

◆Pneumatic balancing device is used to dynamically balance the weight of the slider and the upper die to improve the dynamic accuracy of the punch.

◆The control part adopts the PLC of Japan Omron Corporation for centralized control, which effectively guarantees the reliability of the electric control part.

◆Japan TACO double solenoid valve, reliable quality, to ensure the safety and reliability of clutch operation

◆Adopt Yangzhou Daqi's electronic cam controller to ensure the various signals required for punching.

◆The lubricating system adopts Zhejiang Yongjia Liubian concentrated thin oil lubrication system to ensure that the moving parts are fully lubricated.

◆This machine is equipped with a variety of safety and insurance interlocking systems, which can perform self-check, stop and alarm on the equipment in operation.


Nominal force strokeWorkbench thicknessDie handle hole size (diameter × depth)

parameter

unit

JFC21-45T

JLC21-45T

JFC21-63T

Compelling

KN

450

450

630

mm

1.6

1.6

2


Slider stroke

mm

30

30

40

Number of trips

min

120-200

200-250

120-180

Maximum die height

Mm

270

270

300

Adjustable height of mold

Mm

50

50

60

Distance from slider center to fuselage

Mm

300

300

300

Working table size (front and rear × left and right)

Mm

580×860

580×860

640*900

Bore size of body table

mm

350×350

350×350

350*350

Mm

100

100

110


Slider bottom surface size (front and rear × left and right)

mm

360×600

360×600

400*640

mm

Φ40×60

Φ40×60

φ50*80


Material width

mm

300

300

400

Suction length

mm

1000

1000

1000

Aggregate height

mm

600

600

600

Coil inner diameter

mm

Φ75

Φ75

Φ75

Coil outer diameter

mm

850

850

850

Distance between columns

mm

550

550

600

Motor Power

KW

5.5

5.5

7.5


Contact us now | Get an answer within 1 hour!