BESCOMT
Operation Rules of Precision Punch

1. Punch workers must learn, master the structure and performance of the punch, be familiar with the operating procedures and obtain operating permits before they can operate independently.

2. The safety protection and control devices on the punching machine are used correctly, and no disassembly is allowed.

3. Check whether the transmission, connection, lubrication and other parts of the punch and the protective safety device are normal. The mold mounting screw must be firm and must not be moved.

4. The punch should run empty for 2-3 minutes before work, check the flexibility of the control devices such as the foot brake, and confirm that it can be used only after normal operation.

5. The mold should be tight and firm, the upper and lower molds should be aligned to ensure the correct position, and the punch should be turned by hand (empty car) to ensure that the mold is working in good condition.

6. Pay attention to lubrication before driving and remove all floating objects from the punch.

7. When the punch is moved or during the punching process, the operator should stand properly, the hand and head should be kept at a certain distance from the punch, and pay attention to the punch movement at all times. Chatting with others is strictly prohibited.

8. When punching short workpieces, special tools should not be used to directly feed or take parts.

9. When punching or long body parts, safety support racks or other safety measures should be set to avoid digging.

10. When single punching, the hands and feet are not allowed to be placed on the hand and foot brakes. They must be punched and moved (stepped) once to prevent accidents.

11. When two or more people work together, those responsible for moving (stepping) the brake must pay attention to the action of the feeder. It is strictly forbidden to pick up the parts while moving (stepping) the brake.

12. Stop at the end of the work in time, cut off the power supply, wipe the machine, and clean up the environment.


 
Previous:Characteristics and performance of high-precision punch
Next:No Data...